Additive MOTUL AUTOMATIC TRANSMISSION CLEAN 300ML

MOTUL AUTOMATIC TRANSMISSION CLEAN is a pre-drain automatic transmission cleaner designed to be used in all types of automatic transmissions, conventional with torque converters (AT), with dual clutch transmission (DCT) or with continuously variable transmission (CVT) in preparation for an oil change. MOTUL AUTOMATIC TRANSMISSION CLEAN effectively cleans deposits, sludge and varnish which appear on the automatic transmission components. The removed micro-particles are then evacuated during the process of oil drain leaving the transmission thoroughly clean. MOTUL AUTOMATIC TRANSMISSION CLEAN provides a perfect lubrication during cleaning process.

MOTUL AUTOMATIC TRANSMISSION CLEAN, added to automatic transmission fluid before changing the oil, enables:

• Effective and fast cleaning of all types of automatic transmissions (AT, DCT, CVT) before changing the oil to make the most of all the qualities of the new oil after draining
• dissolving deposits, sludge, varnish and debris accumulated in transmissions to reduce wear for better performance and longer transmission life
• evacuating deposits, varnish and other debris from sensitive areas and components such as sensors, actuators, etc. ..., and hydraulic valves to ensure optimal operation of the automatic gearbox during shifting and reduce fuel consumption

MOTUL AUTOMATIC TRANSMISSION CLEAN is highly effective at cleaning and harmless to gasket materials, o-rings, seals and mechanical components to increase the service life of the transmission system.

MOTUL AUTOMATIC TRANSMISSION CLEAN is an automatic transmission cleaning additive, specially adapted for use with MOTUL EVO cleaning and oil change equipment, which carries out oil change operations on all automatic transmissions autonomously, completely draining the old fluid and completely replacing it with the new fluid. It enables a controlled and total cleaning process to be carried out.

MOTUL AUTOMATIC TRANSMISSION CLEAN can also be used with all types of similar devices for cleaning automatic transmissions available on the market.

In all cases, always follow the manufacturer's instructions for the correct use of these machines.

1. Add MOTUL AUTOMATIC TRANSMISSION CLEAN to the oil change and cleaning equipment or to the gearbox directly (if you don't have oil change equipment, it is recommended that you change the oil several times until you are sure that the oil in the gearbox is new) before changing the old lubricant.
2. Let the engine run for approx. 15 minutes with frequent load changes (use all gear positions) according to the manufacturer's instructions.
3. Change the transmission fluid and filter according to the manufacturer's instructions.

A dose of 300 ml is sufficient for an automatic gearbox capacity of 8 litres. For larger capacities, add 40 ml per litre of gear oil.

Do not exceed the recommended proportion. If necessary, carry out 2 successive treatments.