O.RANGE Telescopic Car Wash Brush 80–130 cm

O.RANGE Telescopic Car Wash Brush 80–130 cm

The O.RANGE car wash brush with a telescopic handle is an accessory designed to assist with manually washing the exterior of a car.
Its key distinguishing feature is the telescopic handle, adjustable between 80 and 130 cm, allowing you to adapt the brush’s length to the area of the vehicle you wish to reach.

What is it for?

It is designed for manually washing the exterior surfaces of the vehicle, allowing you to reach different areas without relying solely on a sponge or washing glove used directly by hand.
The extendable handle is particularly useful when you need to increase your reach whilst washing certain parts of the vehicle.

How to use

Before starting to wash the car, it is recommended that you pre-rinse the vehicle to remove dust, grit and other loose dirt particles.
Adjust the telescopic handle to the length required for the area you wish to clean.
Use the brush together with water and a suitable car wash product, working progressively across the vehicle’s various exterior surfaces.
Whilst using the brush, rinse it regularly to remove any accumulated dirt. After washing, rinse the vehicle thoroughly to remove any residue from the product used.

Recommendations for use

To minimise the transfer of dirt between different areas, it is recommended to start with the upper surfaces, which are usually less soiled, and work progressively downwards.
Avoid using a brush on the bodywork that has previously been used on wheel rims, wheels or other areas with a high build-up of dirt.
When using car wash shampoos or other chemical products, follow the manufacturers’ instructions.

Care and maintenance

After each use, rinse the brush thoroughly to remove any detergent residue and dirt.
Allow it to dry before storing.
Retract the telescopic handle to make storage easier when the brush is not in use.