Additive MOTUL GDI CLEAN 300ML

MOTUL GDI CLEAN has been designed for use in all petrol engines with a direct injection system, with injectors working at high pressures, turbo or atmospheric, with catalytic converters and petrol particulate filters (GPF) or without them, using all types of commercial petrol.

Especially dedicated to the perfect cleaning of intake valves (combined GDI-PFI system) and high-pressure injectors installed in new engines, MOTUL GDI CLEAN prevents wear during cleaning processes, as well as the deposition of already dissolved residues.

It removes deposits of residue and varnish from the intake (combined GDI-PFI system) and exhaust valves, injector nozzles, piston head and fire rings, as well as the entire petrol fuel supply circuit in direct injection systems, without dismantling.

A clean fuel injection system is a prerequisite for efficient operation and engine performance. MOTUL GDI CLEAN makes it possible to:

• clean the injectors (for better fuel spraying and atomisation)
• prevent the formation of deposits and varnish on the valves and combustion chambers
• remove contamination throughout the high-pressure direct fuel injection system

Regular use of MOTUL GDI CLEAN provides:

• optimum engine performance
• fuel savings
• increased service life of the fuel injection system
• reduced emissions of pollutants from exhaust gases

Pour a can of MOTUL GDI CLEAN directly into the tank before refuelling, regularly depending on the type of use (reduce the intervals in urban conditions).

The fuel injection system will then be thoroughly cleaned, especially the valves, injectors and combustion chambers.

One can of MOTUL GDI CLEAN is enough for a tank with a capacity of up to 70 litres. For tanks with a larger capacity, the recommended mixing ratio is 0.50% (200:1).

Do not exceed the recommended ratio. If necessary, carry out 2 successive treatments. Treatment for immediate action: use the product neat, directly into the fuel system with the Motul Inject 3 in 1 equipment adaptation kit.