Additive MOTUL ENGINE FLUSH 300ML

MOTUL ENGINE FLUSH  is designed for use in all types of petrol and diesel engines, naturally aspirated or turbocharged, with or without exhaust after-treatment systems, and is compatible with all types of fuel. MOTUL ENGINE FLUSH  effectively cleans deposits and blockages that appear in the engine. The removed microparticles are evacuated at the time of the oil change. MOTUL ENGINE FLUSH provides perfect lubrication during the cleaning process.

MOTUL ENGINE FLUSH, added to the engine oil before the change, allows:

• Reduction of wear
• Reduction of oil and fuel consumption
• Increase compression in the cylinders, equalising the values in all cylinders
• Reduction of pollutant emissions in the exhaust
• Dissolve and evacuate deposits, varnishes and other combustion residues from sensitive areas such as tappets, hydraulic rings and piston housings
• Take full advantage of the capabilities of new oil
• Increase the service life of catalytic converters, GPFs and DPFs

Before each engine oil change, add one dose of MOTUL ENGINE FLUSH to the used oil at engine temperature (hot). Let the engine idle for 15 minutes. Then change the engine oil and filter.

The contents of one dose are sufficient for an engine oil capacity of up to 5 litres. For larger capacities, add 60 ml of MOTUL ENGINE FLUSH for each additional litre of oil (above 5 litres). For very dirty engines, do not increase the dosage, but carry out two successive treatments.

Combined with the fuel cleaning products PETROL INJECTOR CLEANER or DIESEL INJECTOR CLEANER or PETROL ANTI-SMOKE or DIESEL ANTI-SMOKE, the LIMPEZA INTERNA DO MOTOR pre-change engine additive significantly reduces pollutant emissions that are outside the vehicle's limits, to successfully pass the ITV inspection.