Additive MOTUL COOLING SYSTEM CLEAN 300ML

MOTUL RADIATOR CLEAN is designed for use in all types of petrol and diesel engines, naturally aspirated or turbocharged, with or without a catalytic converter, using all types of fuel.

MOTUL RADIATOR CLEAN effectively cleans deposits and obstructions that appear in the engine's cooling circuit. The removed deposits and microparticles are evacuated by draining the coolant.

MOTUL RADIATOR CLEAN provides perfect lubrication during the cooling circuit cleaning process. Recommended for use in all closed liquid-cooled cooling systems, such as passenger cars, commercial vehicles... and industrial heat exchangers. Improves heating and cooling performance. Improves the operational reliability of the cooling system and extends the life expectancy of all components.

MOTUL RADIATOR CLEAN, added to the engine cooling circuit before draining, enables:

• The removal of deposits caused by operating conditions throughout the cooling circuit.
• Cleaning the entire cooling system
• Dissolving and removing precipitation and sediment from the radiator
• Improving the performance of valves, thermostats and water pumps
• Reducing engine temperature

1. Before each coolant drain, add MOTUL RADIATOR CLEAN to the cooling system before changing the coolant.
2. Set all the heater controls to the "hot" position
3. Let the engine idle for about 30 minutes.
4. Drain the system completely and flush with clean water.
5. Refill the cooling system with new coolant according to the manufacturer's instructions.

Caution: Open the radiator filler cap slowly and continuously - system under pressure - risk of burns! 300 ml is sufficient for cooling systems with a capacity of 10 litres.

Do not exceed the recommended proportion. If necessary, carry out 2 consecutive treatments.