




| PORTES GRÁTIS PARA ENCOMENDAS ACIMA DE 50€ + IVA, EXCEPTO PRODUTOS 4X4 (VÁLIDO APENAS PARA PORTUGAL CONTINENTAL) |
The OSRAM LIGHTsignal LED BEACON LIGHT warning light is a 360° rotating light with eight high-power LEDs, up to 1200 lm, designed for maximum safety and visibility in emergency situations or cargo transport. Compatible with 12 V and 24 V, robust (IP65 / IK08), non-slip base and fixed mounting, it provides signalling day and night, even in adverse conditions.
The OSRAM LIGHTsignal LED BEACON LIGHT warning light is a 360° amber LED rotating light that can be installed on vehicles with unusual width, length or load, as well as on municipal vehicles, emergency vehicles, command vehicles and accident assistance vehicles to draw attention to an unusual situation in road traffic or in the working environment. The OSRAM rotating light can be used for better visual recognition, marking and protection of danger spots or special locations. In addition, rotating lights are used in certain installations, on machines and devices, as well as in alarm systems. The OSRAM LED rotating beacon is characterised by high efficiency thanks to eight high-power, long-life LEDs with 1900 Kelvin and 1200 lumens, thus ensuring better visibility and therefore greater safety for you and others during the day and at night. Thanks to its non-slip rubber base for shock absorption, the OSRAM LED warning light is insensitive to vibrations, while the all-rubber base also acts as a seal between the product and the ground. In addition, the robust, shatterproof polycarbonate housing can withstand even heavier loads. To reduce and prevent dirt build-up on the rotating beacon, the OSRAM LIGHTsignal LED uses a smooth surface on the housing, preventing the signal effect from being impaired by dirt. The OSRAM LIGHTsignal LED BEACON LIGHT rotating beacon impresses with its high luminosity and low energy consumption. Thanks to the low energy consumption of LEDs, the OSRAM rotating warning light is also suitable for longer periods of use. Due to its compact and modern design, the rotating light offers a variety of application possibilities and high flexibility, as it is compatible with both 12V and 24V vehicles. The included installation material allows for direct and precise mounting and therefore immediate use of the rotating lights. The three-point mounting system allows the rotating light to be mounted securely and firmly on the vehicle roof. In addition, the OSRAM LIGHTsignal LED warning light complies with ECE R10 and R65 guidelines and is therefore approved for use in road traffic. The OSRAM LIGHTsignal LED rotating beacon has been tested in an environmental simulation laboratory and is certified according to DIN EN ISO/IEC 17025 for extreme external influences in terms of water, dust, heat, cold and impact from falls, and validated with protection classes IP65 and IK08. The integrated thermal management system regulates the temperature of the LED light and can prevent damage from overheating. Polarity protection prevents incorrect polarity reversal in the power supply and can thus prevent possible damage by automatically switching off the LEDs. OSRAM provides a 2-year warranty on this product.
Special regulations apply to the use and application of rotating lights. This is regulated by the respective road traffic licensing regulations specific to each country.
Electrical Data |
|
| Nominal voltage | 12/24 V |
| Nominal wattage | 7 W |
Photometric Data |
|
| Color temperature | 1900 K |
| Light color LED | Orange |
Physical Attributes & Dimensions |
|
| Height | 89.0 mm |
| Width | 148.0 mm |
| Length | 148.0 mm |
| Product weight | 305.00 g |
Certificates & standards |
|
| Standards | ECE R10 & ECE R65 |
| IK Class | IK08 |
| Type of protection | IP65 |