

| PORTES GRÁTIS PARA ENCOMENDAS ACIMA DE 50€ + IVA, EXCEPTO PRODUTOS 4X4 (VÁLIDO APENAS PARA PORTUGAL CONTINENTAL) |
MOTUL MOTYLGEAR 75W-90 is a high-performance Technosynthese® transmission oil, ideal for manual gearboxes and differentials without LSD. It offers anti-wear protection, thermal resistance, high cold fluidity and smooth gear changes even in ‘hard’ or noisy gearboxes. It reduces friction, extends component life and improves driving comfort.
Specially recommended for gearboxes which are hard to shift and/or noisy gearboxes.
All mechanical transmissions, synchronised or non-synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip systems, operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.
Synthetic Technosynthese® “Extreme Pressure” lubricant for an efficient anti-wear protection reinforced with synthesis base stocks for a better resistance at high temperature and longer lifetime.
Stays in viscosity grade 90 after the KRL 20 hours shear test as requested by SAE J306 Standard.
Very high lubricating power which decreases friction and wear
Viscosity grade 90 at high temperature to provide outstanding oil film resistance at high temperature and/or to reduce transmission noise.
Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
Less effort required on the gear lever to shift the gears for improved driving comfort.
Suitable for any type of seal and yellow material used in gearboxes design.
Anti-corrosion, Anti-foam
Oil change: according to the manufacturer's recommendation and adapted to your particular conditions of use.
Before use, check the instructions in the vehicle user manual.
| Viscosity grade | SAE J306 | 75W-90 |
| Density at 20°C (68°F) | ASTM D1298 | 0.855 |
| Viscosity at 40°C (104°F) | ASTM D445 | 114.1 mm²/s |
| Viscosity at 100°C (212°F) | ASTM D445 | 18.1 mm²/s |
| Viscosity Index | ASTM D2270 | 176.0 |
| Pour point | ASTM D97 | -51.0 °C / -60.0 °F |
| Flash point | ASTM D92 | 199.0 °C / 390.0 °F |