

| PORTES GRÁTIS PARA ENCOMENDAS ACIMA DE 50€ + IVA, EXCEPTO PRODUTOS 4X4 (VÁLIDO APENAS PARA PORTUGAL CONTINENTAL) |
MOTUL GEAR COMPETITION 75W-140 is a 100% synthetic ester-based oil developed for competition transmissions and differentials under extreme conditions. Suitable for track, rally and raid use, it guarantees protection against wear, maximum thermal resistance, smooth cold shifting and superior performance in LSD differentials.
Synthetic technology racing lubricant based on Ester-Technology For all hypoid differentials with limited slip system, gearbox with integrated limited slip differential, mechanical transmission, synchronised or not synchronised gearboxes, transfer gearboxes operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. 0% shear loss: Unshearable oil film in extreme conditions. Very high lubricating power which decreases friction and wear. 140 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow comfortable gear shifting.
Extreme Pressure high performance lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time.
Included friction modifier avoid noisy or dragging limited slip differential.
0% shear loss : Unshearable oil film in extreme conditions.
Stays in 140 viscosity grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update.
Very high lubricating power which decreases friction and wear.
140 viscosity grade at high temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
Less effort required on the gear lever to shift the gears.
Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.
Oil change: according to the manufacturer's recommendation and adapted to your particular conditions of use.
Before use, check the instructions in the vehicle user manual.
| Color | Visual | Blue |
| Viscosity grade | SAE J306 | 75W-140 |
| Density at 20°C (68°F) | ASTM D1298 | 0.903 |
| Viscosity at 40°C (104°F) | ASTM D445 | 170.0 mm²/s |
| Viscosity at 100°C (212°F) | ASTM D445 | 24.7 mm²/s |
| Viscosity Index | ASTM D2270 | 178.0 |
| Pour point | ASTM D97 | -36.0 °C / -33.0 °F |
| Flash point | ASTM D92 | 212.0 °C / 413.0 °F |