

| PORTES GRÁTIS PARA ENCOMENDAS ACIMA DE 50€ + IVA, EXCEPTO PRODUTOS 4X4 (VÁLIDO APENAS PARA PORTUGAL CONTINENTAL) |
MOTUL CLASSIC PERFORMANCE 20W-50 is a premium multigrade mineral oil developed for classic engines (1950-1970). With a high ZDDP content (>1800 ppm) and molybdenum, it ensures superior protection for cams, tappets and critical components. It offers easy cold starts, reduces oil consumption and ensures optimal preservation in collector vehicles.
Premium mineral multigrade motor oil specially designed for classic engines manufactured between 1950 and 1970. Lubricant for petrol or diesel engines, naturally aspirated or turbocharged 4-stroke engines with carburettor or injection, SAE 20W-50 formula that complies with API SF/CC standards for 1950-1970 models, including MOTUL's current advanced technology, developed in high-performance motorsport, to offer complete overall performance for your classic car.
MOTUL CLASSIC PERFORMANCE 20W-50 is formulated with a unique combination of high-Zinc (ZDDP content above 1800 ppm) and Molybdenum (Moly) additives to provide the best performance for larger displacement engines, while still offering protection of critical engine components like high-lift cams and flat-tappets.
Medium detergent level compatible with elastomer gaskets. Offers excellent oil consumption control, good shear stability and better cold engine start-ups to prevent engine wear after long periods of storage. Multigrade engine oil suitable for year-round use (all seasons protection).
CLASSIC PERFORMANCE 20W-50 meets manufacturers’ standards from that time while benefiting of the advanced technology of today’s MOTUL lubricants.
The high viscosity grade at high temperature (SAE 50) is totally adapted to high mileage engines which tend to be heavy on oil consumption.
Caution: This oil is rated API SF. It is not suitable for use in most gasoline-powered automotive engines built after 1988. Use in modern engines may not provide adequate protection against build-up of engine sludge, oxidation, or wear.
Leaves an oil film protection on engine moving parts during wintering periods.
Change interval: according to the manufacturer's recommendations and specific conditions of use.
Can be mixed with synthetic or mineral oils.
Before use or in case of doubt, always consult the vehicle owner's or maintenance manual.
| Viscosity grade | SAE J 300 | 20W-50 |
| Density at 20°C (68°F) | 0.887 | |
| Viscosity at 40°C (104°F) | ASTM D445 | 155.5 mm2 /s |
| Viscosity at 100°C (212°F) | ASTM D445 | 17.8 mm2 /s |
| Viscosity Index | ASTM D4741 | 126.0 |
| Pour point | ASTM D97 | -33.0 °C / -27.0 °F |
| TBN | ASTM D2896 | 8.8 mg KOH/g |
| Flash point | ASTM D92 | 236.0 °C / 457.0 °F |