

| PORTES GRÁTIS PARA ENCOMENDAS ACIMA DE 50€ + IVA, EXCEPTO PRODUTOS 4X4 (VÁLIDO APENAS PARA PORTUGAL CONTINENTAL) |
MOTUL SPECIFIC RBS0-2AE 0W-20 has been developed for Volvo DRIVE-E petrol and diesel engines with VCC RBS0-2AE approval. It provides up to 3.4% fuel economy, superior protection against wear and oxidation, easier cold starts and reduced CO₂ emissions, meeting the requirements of ACEA C5 standards.
High Performance synthetic technology Fuel Economy Engine Oil specially designed for VOLVO "DRIVE-E" Gasoline (VEP) and Diesel (VED) latest generation fitted with catalytic converters and Diesel Particulates Filters (DPF).
Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection. For vehicles that are Euro 4, 5 or 6 emission regulation compliant and requiring an ACEA C5 engine oil i.e. very low HTHS (≥ 2.6 & < 2.9 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%).
Can be used also for OEMs requiring 0W-20 engine oil with low friction and very low HTHS (High Temperature High Shear) viscosity oil (≥ 2.6 mPa.s). Suitable also for Gasoline engines requiring an ACEA C5 or ACEA A1/B1 standards and 0W-20 viscosity grade Fuel Economy lubricant. Compatible with catalytic converters.
The standard VCC RBS0-2AE is particularly demanding on the performance of Fuel Economy and associated with the ACEA C5 standard for lubricants, MOTUL SPECIFIC RBS0-2AE 0W-20 provides significant energy saving performance (up to 3.4% compare to a 15W-40 reference oil). This improved fuel economy implies lower levels of pollutants and fully satisfies commitments of manufacturers such as VOLVO for CO2 reduction.
This Synthese-Technologie engine oil is exclusively formulated to lubricate the latest generation of VOLVO “DRIVE-E” Gasoline (VEP) engines and Diesel (VEP) engines.
Lastest generation of VOLVO engines type VEA (4-cylinders), whether Petrol (VEP) or Diesel (VED) versions require a very specific lubricant because they are smaller and lighter. They provide way more efforts and run at increaded temperatures, while providing the same performance levels as the old engine generations they replace.
BENEFITS AND PERFORMANCE:
MOTUL SPECIFIC RBS0-2AE 0W-20 delivers outstanding oil film resistance, while facilitating cold start, reducing friction in the engine, maintaining the oil pressure and lowering engine operating temperatures.
Through its exceptional lubricating properties, MOTUL SPECIFIC RBS0-2AE 0W-20 provides high level of wear resistance, high temperature resistance and oxidation resistance. It reduces the formation of deposits, reduces wear and enables perfect control of oil consumption.
TECHNICAL RECOMMENDATIONS:
Change interval: according to the manufacturer's recommendations and specific conditions of use.
Can be mixed with synthetic or mineral oils.
Before use or in case of doubt, always consult the vehicle owner's or maintenance manual.
| Viscosity grade | SAE J 300 | 0W-20 |
| Density at 20°C (68°F) | ASTM D1298 | 0.839 |
| Viscosity at 40°C (104°F) | ASTM D445 | 43.8 mm²/s |
| Viscosity at 100°C (212°F) | ASTM D445 | 8.8 mm2 /s |
| HTHS viscosity at 150°C (302°F) | ASTM D4741 | 2.9 mPa.s |
| Viscosity Index | ASTM D2270 | 184.0 |
| Pour point | ASTM D97 | -48.0 °C / -54.0 °F |
| Flash point | ASTM D92 | 222.0 °C / 432.0 °F |
| Sulfated Ash | ASTM D874 | % weight 0.74 |
| TBN | ASTM D2896 | 9.1 mg KOH/g |